TEIN S.TECH Lowering Springs – 1998–2005 Lexus GS300/400/430 – SKY98-C3B00

Save $92
TeinSKU: TEINSKY98-C3B00

Price:
$368 $460

Description

This S.TECH spring kit is selected for Lexus GS300 / Lexus GS400 / Lexus GS430 applications detailed below. It changes the spring and ride-height specification while retaining the vehicle’s compatible original-style damper arrangement.

Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.

The S.TECH spring family offers an application-specific lowering option without converting to a height-adjustable coilover system. Spring rate controls how much the suspension deflects under load; the dampers still determine how that movement is controlled.

Product identification

Item Detail
Manufacturer part number SKY98-C3B00
Product family S.TECH
Configuration Lowering spring kit; dampers are not included

Application-specific specifications

Application Front spring rate Rear spring rate Front reference height change Rear reference height change
Lexus GS300 1998–2005 (JZS160L), 3000 cc, RWD 6.1 kgf/mm 7.2 kgf/mm -24 mm (-0.9 in) -11 mm (-0.4 in)
Lexus GS400 1998–2000 (UZS160L), 4000 cc, RWD 6.1 kgf/mm 7.2 kgf/mm -29 mm (-1.1 in) -29 mm (-1.1 in)
Lexus GS430 2001–2005 (UZS160L), 4300 cc, RWD 6.1 kgf/mm 7.2 kgf/mm -29 mm (-1.1 in) -29 mm (-1.1 in)

Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.

Vehicle application

Years / production dates Make Model Chassis Trim / restriction Engine displacement Drivetrain Market
1998–2005 LEXUS GS300 JZS160L See installation notes 3000 cc RWD USA
1998–2000 LEXUS GS400 UZS160L See installation notes 4000 cc RWD USA
2001–2005 LEXUS GS430 UZS160L See installation notes 4300 cc RWD USA

Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.

Installation and setup

Inspect the dampers, upper mounts and spring isolators before installation. Lowering reduces available clearance and can change alignment. Follow the application-specific bump-stop instructions and check alignment and tire clearance after fitting.

Application-specific installation notes

  • Lexus GS300 1998–2005 (JZS160L): 4dr/6cyl
  • Lexus GS400 1998–2000 (UZS160L): 4dr/8cyl. Front: cut bump rubber at 20 mm from the bottom and use the upper portion.
  • Lexus GS430 2001–2005 (UZS160L): 4dr/8cyl. Front: cut bump rubber at 20 mm from the bottom and use the upper portion.

Estimate shipping

You may also like

Recently viewed