TEIN S.TECH Lowering Springs – 1990–1999 Toyota MR2

Save $80
TeinSKU: TEINSKY96-S3B00

Price:
$320 $400

Description

This S.TECH spring kit is selected for Toyota MR2 applications detailed below. It changes the spring and ride-height specification while retaining the vehicle’s compatible original-style damper arrangement.

Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.

The S.TECH spring family offers an application-specific lowering option without converting to a height-adjustable coilover system. Spring rate controls how much the suspension deflects under load; the dampers still determine how that movement is controlled.

Product identification

Item Detail
Manufacturer part number SKY96-S3B00
Product family S.TECH
Configuration Lowering spring kit; dampers are not included

Application-specific specifications

Application Front spring rate Rear spring rate Front reference height change Rear reference height change
Toyota MR2 1990–1999 (SW20L), 2000 cc, Mid-engine RWD 2.8 kgf/mm 4.9 kgf/mm -38 mm (-1.5 in) -42 mm (-1.7 in)
Toyota MR2 1990–1999 (SW21L), 2200 cc, Mid-engine RWD 2.8 kgf/mm 4.9 kgf/mm -38 mm (-1.5 in) -42 mm (-1.7 in)

Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.

Vehicle application

Years / production dates Make Model Chassis Trim / restriction Engine displacement Drivetrain Market
1990–1999 TOYOTA MR2 SW20L See installation notes 2000 cc Mid-engine RWD USA
1990–1999 TOYOTA MR2 SW21L See installation notes 2200 cc Mid-engine RWD USA

Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.

Installation and setup

Inspect the dampers, upper mounts and spring isolators before installation. Lowering reduces available clearance and can change alignment. Follow the application-specific bump-stop instructions and check alignment and tire clearance after fitting.

Application-specific installation notes

  • Toyota MR2 1990–1999 (SW20L): 2dr/4cyl. Front: cut bump rubber at 15 mm from the bottom and use the upper portion.
  • Toyota MR2 1990–1999 (SW21L): 2dr/4cyl. Front: cut bump rubber at 15 mm from the bottom and use the upper portion.

Estimate shipping

You may also like

Recently viewed