Description
The TEIN FLEX Z suspension package for Subaru Legacy applications detailed below is intended for street use and adjustable ride height. Its spring, damper and mounting configuration should be selected as a complete application rather than by vehicle name alone.
Design and adjustment
Twin-tube dampers use 16-level adjustment to change compression and rebound together. Full-length height adjustment separates the primary ride-height setting from spring preload, making it easier to establish a consistent starting setup.
FLEX Z uses sealed damper bodies. Replacement shock bodies are the service route; this series is not conventionally disassembled for overhaul.
Product identification
| Item | Detail |
|---|---|
| Manufacturer part number | VSSB6-C1SS3 |
| Series | FLEX Z |
Application-specific specifications
| Application | Front spring rate | Rear spring rate | Front reference height change | Rear reference height change |
|---|---|---|---|---|
| Subaru Legacy 2010–2014 (BM9), 2500 cc, 4WD/AWD | 7 kgf/mm | 6 kgf/mm | -50 mm (-2.0 in) | -45 mm (-1.8 in) |
Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.
| Application | Front upper mount | Rear upper mount |
|---|---|---|
| Subaru Legacy 2010–2014 (BM9), 2500 cc, 4WD/AWD | Reinforced-rubber mount | Reinforced-rubber mount |
| Application | Recommended front height-change range | Recommended rear height-change range |
|---|---|---|
| Subaru Legacy 2010–2014 (BM9), 2500 cc, 4WD/AWD | -60 to -40 mm | -55 to -35 mm |
Vehicle application
| Years / production dates | Make | Model | Chassis | Trim / restriction | Engine displacement | Drivetrain | Market |
|---|---|---|---|---|---|---|---|
| 2010–2014 | SUBARU | LEGACY | BM9 | See installation notes | 2500 cc | 4WD/AWD | USA |
Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.
Included configuration
The application record identifies springs as included with this suspension kit. Upper-mount configuration is shown separately above; components marked as original are reused from the vehicle.
Installation and setup
Set the suspension within its application-specific recommended height range, check clearance through steering and suspension travel, and align the vehicle after fitting. Change damping settings progressively where adjustment is available; the firmest setting is not automatically the most suitable.
