Description
Whiteline Sway Bar End Links (25mm / 30mm) – 30mm) Adjustable Heavy Duty Ball Joints — On a modified chassis, the link between the sway bar and suspension deserves the same attention as the bar itself—especially when ride height or bar geometry has changed. This product is listed for 30mm) Adjustable Heavy Duty Ball Joints.
A healthy link transmits suspension movement into the sway bar without unnecessary delay or deflection. Where the exact Whiteline link is adjustable, length can be used to place the bar in better geometry and remove unwanted preload at normal ride height rather than forcing the bar into position during installation.
Technical Overview
- Published size: 25mm / 30mm
- Adjustment: Adjustable
- Application: 30mm) Adjustable Heavy Duty Ball Joints
- Whiteline part number: KLC180-135
Who This Is For
Most valuable when the factory links are worn, an upgraded sway bar is being installed, or ride-height changes have altered link geometry. Adjustable versions add setup value when preload or link angle needs attention.
Installation & Setup
Whiteline's adjustable-link instructions call for setting length at normal ride height where possible, removing unwanted sway-bar preload, maintaining adequate thread engagement, and rechecking hardware after the initial drive. Apply those steps only to adjustable designs that use this construction.