TEIN S.TECH Lowering Springs – 2013+ Honda Accord (CR2)

Save $78
TeinSKU: TEINSKHD6-S3B00

Price:
$312 $390

Description

This S.TECH spring kit is selected for Honda Accord / Acura Tlx applications detailed below. It changes the spring and ride-height specification while retaining the vehicle’s compatible original-style damper arrangement.

Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.

The S.TECH spring family offers an application-specific lowering option without converting to a height-adjustable coilover system. Spring rate controls how much the suspension deflects under load; the dampers still determine how that movement is controlled.

Product identification

Item Detail
Manufacturer part number SKHD6-S3B00
Product family S.TECH
Configuration Lowering spring kit; dampers are not included

Application-specific specifications

Application Front spring rate Rear spring rate Front reference height change Rear reference height change
Honda Accord 2013–2017 (CR2), 4DR/4CYL, 2400 cc, FWD 3.8 kgf/mm 3.9 kgf/mm -35 mm (-1.4 in) -15 mm (-0.6 in)
Honda Accord 2013–2017 (CR3), 4DR/6CYL, 3500 cc, FWD 3.8 kgf/mm 3.9 kgf/mm -40 mm (-1.6 in) -25 mm (-1.0 in)
Acura Tlx 2015–2020 (UB1), 4DR/4CYL, 2400 cc, FWD 3.8 kgf/mm 3.9 kgf/mm -30 mm (-1.2 in) -15 mm (-0.6 in)

Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.

Vehicle application

Years / production dates Make Model Chassis Trim / restriction Engine displacement Drivetrain Market
2013–2017 HONDA ACCORD CR2 4DR/4CYL 2400 cc FWD USA
2013–2017 HONDA ACCORD CR3 4DR/6CYL 3500 cc FWD USA
2015–2020 ACURA TLX UB1 4DR/4CYL 2400 cc FWD USA

Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.

Installation and setup

Inspect the dampers, upper mounts and spring isolators before installation. Lowering reduces available clearance and can change alignment. Follow the application-specific bump-stop instructions and check alignment and tire clearance after fitting.

Estimate shipping

You may also like

Recently viewed