TEIN S.TECH Lowering Springs – 2010+ Hyundai Genesis 2.0T

Save $63
TeinSKU: TEINSKF12-S3B00

Price:
$252 $315

Description

This S.TECH spring kit is selected for Hyundai Genesis Coupe applications detailed below. It changes the spring and ride-height specification while retaining the vehicle’s compatible original-style damper arrangement.

Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.

The S.TECH spring family offers an application-specific lowering option without converting to a height-adjustable coilover system. Spring rate controls how much the suspension deflects under load; the dampers still determine how that movement is controlled.

Product identification

Item Detail
Manufacturer part number SKF12-S3B00
Product family S.TECH
Configuration Lowering spring kit; dampers are not included

Application-specific specifications

Application Front spring rate Rear spring rate Front reference height change Rear reference height change
Hyundai Genesis Coupe 2010 (BK14), 2000 cc, RWD 2.9 kgf/mm 5.9 kgf/mm -30 mm (-1.2 in) -30 mm (-1.2 in)
Hyundai Genesis Coupe 2010 (BK14), 3800 cc, RWD 2.9 kgf/mm 5.9 kgf/mm -27 mm (-1.1 in) -37 mm (-1.5 in)
Hyundai Genesis Coupe 2011–2016 (BK14), 2000 cc, RWD 2.9 kgf/mm 5.9 kgf/mm -36 mm (-1.4 in) -26 mm (-1.0 in)
Hyundai Genesis Coupe 2011–2016 (BK14), 3800 cc, RWD 2.9 kgf/mm 5.9 kgf/mm -27 mm (-1.1 in) -37 mm (-1.5 in)

Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.

Vehicle application

Years / production dates Make Model Chassis Trim / restriction Engine displacement Drivetrain Market
2010 HYUNDAI GENESIS COUPE BK14 See installation notes 2000 cc RWD USA
2010 HYUNDAI GENESIS COUPE BK14 See installation notes 3800 cc RWD USA
2011–2016 HYUNDAI GENESIS COUPE BK14 See installation notes 2000 cc RWD USA
2011–2016 HYUNDAI GENESIS COUPE BK14 See installation notes 3800 cc RWD USA

Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.

Installation and setup

Inspect the dampers, upper mounts and spring isolators before installation. Lowering reduces available clearance and can change alignment. Follow the application-specific bump-stop instructions and check alignment and tire clearance after fitting.

Application-specific installation notes

  • Hyundai Genesis Coupe 2010 (BK14): 4cyl/turbo. Front: cut bump rubber at 20 mm from the bottom and use the upper portion. Rear: cut bump rubber at 20 mm from the bottom and use the upper portion.
  • Hyundai Genesis Coupe 2010 (BK14): 6cyl. Front: cut bump rubber at 20 mm from the bottom and use the upper portion. Rear: cut bump rubber at 20 mm from the bottom and use the upper portion.
  • Hyundai Genesis Coupe 2011–2016 (BK14): 4cyl/turbo. Front: cut bump rubber at 20 mm from the bottom and use the upper portion. Rear: cut bump rubber at 20 mm from the bottom and use the upper portion.
  • Hyundai Genesis Coupe 2011–2016 (BK14): 6cyl. Front: cut bump rubber at 20 mm from the bottom and use the upper portion. Rear: cut bump rubber at 20 mm from the bottom and use the upper portion.

Estimate shipping

You may also like

Recently viewed