ST Suspensions XA Coilover Kit - 1996-2002 BMW Z3 Coupe/Roadster (Non-M)

ST SuspensionsSKU: STS18220016

Price:
$1,419

Description

The ST Suspensions XA Coilover Kit for 1996-2002 BMW Z3 Coupe/Roadster (Non-M) combines adjustable ride height with adjustable rebound damping. It adds a useful setup function for an owner who wants to tune suspension response as well as stance.

Adjustment and construction

  • Application-specific spring-and-damper suspension package.
  • Threaded ride-height adjustment within the permitted application range.
  • Galvanized steel damper housings and protective damper sealing.
  • Adjustable rebound damping with a manufacturer-specified starting setup.
  • Composite spring adjustment perches with stainless steel inserts.

What the adjustment means

Rebound damping controls resistance as the suspension extends after compression. Its adjustment changes extension control; it does not change the spring rate. Begin with the supplied baseline and make small changes, because excessive rebound resistance can impair recovery over repeated bumps.

Technical specifications

Specification Detail
Product ST XA coilover kit
Catalog SKU STS18220016
Manufacturer part number 18220016
Ride-height adjustment Yes, within the application-specific permitted range
Damping adjustment Rebound adjustable

Lowering range

Axle Nominal lowering
Front 35-70mm (approximately 1.4-2.8in)
Rear 30-60mm (approximately 1.2-2.4in)

These are application-specific lowering figures relative to the original suspension reference height. Factory-lowered vehicles may see a smaller additional reduction. Set the vehicle within the permitted installation dimensions and check available suspension travel and wheel clearance; the lowest setting is not automatically the best driving setup.

Application and installation considerations

The stated trim exclusions are part of the application. Confirm the exact model and equipment rather than choosing by chassis family alone.

Set ride height with usable suspension travel and wheel clearance in mind. Follow the supplied fitting procedure, check clearance through steering and suspension movement, and have the alignment checked after installation or a meaningful height change. Retained mounts and supporting suspension parts should be inspected before fitting.

Application requirements

  • Non-M

Vehicle applications

Match the model, year and trim below together with the body style, drivetrain and suspension-equipment requirements stated above. A trim name alone does not establish compatibility with every factory suspension option.

Year Make Model Trim
1999-2002 BMW Z3 Coupe
1996-2002 BMW Z3 Roadster

Estimate shipping

You may also like

Recently viewed