Powerflex Front Control Arm Rear Bushings (Caster Adjustable, Black Series) – Mitsubishi Lancer Evolution 10 CZ4A (10 / 07+)

Powerflex Front Control Arm Rear Bushings (Caster Adjustable, Black Series) for Mitsubishi Lancer Evolution 10 CZ4A (10 / 07+).

Function and design

A suspension arm bushing forms a controlled mounting point between the arm and its supporting structure. Compliance at that joint allows movement under load; the condition and construction of the bushing influence how consistently the arm locates the wheel.

What to consider

For a suspension refresh, replacing deteriorated mounting bushings addresses movement at the joint rather than changing the spring or damper rate. Final steering and handling behavior also depends on the remaining joints, tires and alignment.

Application

Mitsubishi Lancer Evolution 10 CZ4A (10 / 07+).

Series

• Black Series: the firmer series generally intended to prioritize movement control. Product-specific fitment and intended-use restrictions still apply.

Alignment considerations

This is the adjustable version identified in the product specification. Set the geometry within the part's permitted range during an alignment; the final wheel settings depend on the vehicle and remaining suspension adjustments.

Product identification

Installation considerations

Inspect the arm, housing and associated joints during installation. Use the fitting procedure for the selected part number and check alignment after work affecting suspension geometry.