Description
Lowering Adjustment Ranges:
Front in mm: 15-35
Rear in mm: 20-40
Front in inches: 0.6-1.4
Rear in inches: 0.8-1.6
Front Spring Rate (lbs/inch): Progressive
Rear Spring Rate (lbs/inch): 685
KW Variant 1 Coilovers
Sporty handling combined with outstanding looks. With KW pre-configured damping.
- Setup - Factory-Set pre-configured Damping Setup
- Customized Suspension Lowering
- Composite Spring Seat
- Trapezoidal Thread
- Inox Line Stainless Steel
- KW 7 Post Driving Dynamics Test
- Technical Component Report
The KW Variant 1 "Inox-line" coilover kit is our entry point into our street performance lineup. Thanks to the high-quality "Inox-line" stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure.
Setup - Factory-Set pre-configured Damping Setup
The KW Variant 1 "inox-line" coilover allows you to experience an optimized balance of sportiness and comfort while driving. Even with a maximum vehicle load, the dampers always maintain a sporty characteristic.
Continuous Ride Height Adjustment
With KW Variant 1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar.
The Benchmark for Coilovers
KW Variant 1 "inox-line" coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center.
You are not buying a mass produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that has all developed in-house. With the KW Variant 1 "inox-line" coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.
Our experience means your driving pleasure
For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers "Made in Germany".
Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality, and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.
Front in mm: 15-35
Rear in mm: 20-40
Front in inches: 0.6-1.4
Rear in inches: 0.8-1.6
Front Spring Rate (lbs/inch): Progressive
Rear Spring Rate (lbs/inch): 685
KW Variant 1 Coilovers
Sporty handling combined with outstanding looks. With KW pre-configured damping.
- Setup - Factory-Set pre-configured Damping Setup
- Customized Suspension Lowering
- Composite Spring Seat
- Trapezoidal Thread
- Inox Line Stainless Steel
- KW 7 Post Driving Dynamics Test
- Technical Component Report
The KW Variant 1 "Inox-line" coilover kit is our entry point into our street performance lineup. Thanks to the high-quality "Inox-line" stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure.
Setup - Factory-Set pre-configured Damping Setup
The KW Variant 1 "inox-line" coilover allows you to experience an optimized balance of sportiness and comfort while driving. Even with a maximum vehicle load, the dampers always maintain a sporty characteristic.
Continuous Ride Height Adjustment
With KW Variant 1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar.
The Benchmark for Coilovers
KW Variant 1 "inox-line" coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center.
You are not buying a mass produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that has all developed in-house. With the KW Variant 1 "inox-line" coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.
Our experience means your driving pleasure
For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers "Made in Germany".
Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality, and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.