{"product_id":"kw-coilover-kit-v3-vw-passat-3c-b6-b7-wagon-2wd-syncro-4wd-all-engines-w-dcc","title":"KW V3 Coilovers – 2006–2010 Volkswagen Passat (3C\/B6\/B7 | With DCC, 2WD)","description":"\u003cp\u003eThe value of KW V3 on a 2006–2010 Volkswagen Passat (3C\/B6\/B7 | With DCC, 2WD) is not just the change in stance; it is the ability to place the chassis in a more controlled operating window for the way the car is actually driven.\u003c\/p\u003e\u003cp\u003eKW V3 is built around independent low-speed rebound and compression adjustment. KW's current V3 architecture provides 16 rebound clicks and 12 compression clicks, giving an enthusiast meaningful control over chassis support, response and ride without moving into a dedicated motorsport damper. The application-specific calibration is intended to give the chassis a more deliberate response than a one-size-fits-all suspension combination.\u003c\/p\u003e\u003ch3\u003eWhy Choose the KW V3 for This Application?\u003c\/h3\u003e\u003cp\u003eChoose the V3 when the car needs a broader operating window. Independent rebound and compression control makes it easier to balance ride, platform support and tire contact as the build moves between street use and more demanding driving.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16-click low-speed rebound adjustment\u003c\/li\u003e\n\u003cli\u003e12-click low-speed compression adjustment\u003c\/li\u003e\n\u003cli\u003eIndependent rebound and compression tuning\u003c\/li\u003e\n\u003cli\u003eContinuously adjustable ride height within the application-specific range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMake:\u003c\/strong\u003e Volkswagen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog Application:\u003c\/strong\u003e 2006–2010 Volkswagen Passat (3C\/B6\/B7 | With DCC, 2WD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Wagon; 2WD + Syncro 4WD; all engines,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Jobber Model Years:\u003c\/strong\u003e 06-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Part Number:\u003c\/strong\u003e 35280110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Height Adjustment:\u003c\/strong\u003e 35-65 mm (1.4-2.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Height Adjustment:\u003c\/strong\u003e 35-65 mm (1.4-2.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Spring Rate:\u003c\/strong\u003e Progressive-rate spring (KW jobber designation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Spring Rate:\u003c\/strong\u003e Progressive-rate spring (KW jobber designation)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEnthusiast Setup Perspective\u003c\/h3\u003e\u003cp\u003eA good installation should leave enough travel for the road or circuit being used. Chasing maximum lowering at the expense of bump travel can work against the very grip and control this system is intended to provide. After installation, establish ride height and alignment first, then make damper changes in small increments and record them so the effect of each adjustment remains clear.\u003c\/p\u003e\u003ch3\u003eImportant KW Fitment Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 2:\u003c\/strong\u003e Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 57:\u003c\/strong\u003e Only for cars with a clamp diameter of 54,6 mm on the front axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 67:\u003c\/strong\u003e Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 88:\u003c\/strong\u003e Electronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Specifications above are tied to the exact KW part number shown and the application data in the supplied KW jobber sheet. Confirm the vehicle's drivetrain, factory electronic suspension, axle weight and any listed hardware requirements before ordering.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":49306467107066,"sku":"KWS35280110","price":3394.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0325\/6352\/7739\/files\/3c176459fd8eafb7728f9c748e8809cdL_9489e418-9c92-4480-ab89-bc693584a87f.jpg?v=1783059251","url":"https:\/\/lgcracing.com\/products\/kw-coilover-kit-v3-vw-passat-3c-b6-b7-wagon-2wd-syncro-4wd-all-engines-w-dcc","provider":"Legacy Racing","version":"1.0","type":"link"}