{"product_id":"kw-coilover-kit-v3-2019-bmw-x3-g01-xdrive-w-edc","title":"KW V3 Coilovers – 2018+ BMW X3\/X4 (G01\/G02 | With EDC, xDrive)","description":"\u003cp\u003eThe value of KW V3 on a 2018+ BMW X3\/X4 (G01\/G02 | With EDC, xDrive) is not just the change in stance; it is the ability to place the chassis in a more controlled operating window for the way the car is actually driven.\u003c\/p\u003e\u003cp\u003eKW V3 is built around independent low-speed rebound and compression adjustment. KW's current V3 architecture provides 16 rebound clicks and 12 compression clicks, giving an enthusiast meaningful control over chassis support, response and ride without moving into a dedicated motorsport damper. The application-specific calibration is intended to give the chassis a more deliberate response than a one-size-fits-all suspension combination.\u003c\/p\u003e\u003ch3\u003eWhy Choose the KW V3 for This Application?\u003c\/h3\u003e\u003cp\u003eChoose the V3 when the car needs a broader operating window. Independent rebound and compression control makes it easier to balance ride, platform support and tire contact as the build moves between street use and more demanding driving.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16-click low-speed rebound adjustment\u003c\/li\u003e\n\u003cli\u003e12-click low-speed compression adjustment\u003c\/li\u003e\n\u003cli\u003eIndependent rebound and compression tuning\u003c\/li\u003e\n\u003cli\u003eContinuously adjustable ride height within the application-specific range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMake:\u003c\/strong\u003e BMW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e X3 (G01) with electronic dampers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 4WD xDrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Jobber Model Years:\u003c\/strong\u003e 2018+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Part Number:\u003c\/strong\u003e 352200CT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Height Adjustment:\u003c\/strong\u003e 30-55 mm (1.2-2.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Height Adjustment:\u003c\/strong\u003e 25-50 mm (1.0-2.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Spring Rate:\u003c\/strong\u003e Progressive-rate spring (KW jobber designation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Spring Rate:\u003c\/strong\u003e 515 lb\/in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEnthusiast Setup Perspective\u003c\/h3\u003e\u003cp\u003eA good installation should leave enough travel for the road or circuit being used. Chasing maximum lowering at the expense of bump travel can work against the very grip and control this system is intended to provide. After installation, establish ride height and alignment first, then make damper changes in small increments and record them so the effect of each adjustment remains clear.\u003c\/p\u003e\u003ch3\u003eImportant KW Fitment Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 1:\u003c\/strong\u003e Height adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 67:\u003c\/strong\u003e Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 88:\u003c\/strong\u003e Electronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Specifications above are tied to the exact KW part number shown and the application data in the supplied KW jobber sheet. Confirm the vehicle's drivetrain, factory electronic suspension, axle weight and any listed hardware requirements before ordering.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":49275384627450,"sku":"KWS352200CT","price":3784.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0325\/6352\/7739\/files\/3c176459fd8eafb7728f9c748e8809cdL_c36ba3ec-91b9-4adf-b07a-81fcba24d8bc.jpg?v=1782954296","url":"https:\/\/lgcracing.com\/products\/kw-coilover-kit-v3-2019-bmw-x3-g01-xdrive-w-edc","provider":"Legacy Racing","version":"1.0","type":"link"}