{"product_id":"kw-coilover-kit-v2-for-bmw-x3-f25-with-edc","title":"KW V2 Coilovers – 2011–2018 BMW X3\/X4 (F25\/F26 | With EDC)","description":"\u003cp\u003eThe value of KW V2 on a 2011–2018 BMW X3\/X4 (F25\/F26 | With EDC) is not just the change in stance; it is the ability to place the chassis in a more controlled operating window for the way the car is actually driven.\u003c\/p\u003e\u003cp\u003eKW V2 adds low-speed rebound adjustment to the core KW street coilover concept. KW's current V2 technology uses a 16-click rebound adjuster, allowing the driver to influence how firmly the chassis is supported as the suspension extends after a compression event. The application-specific calibration is intended to give the chassis a more deliberate response than a one-size-fits-all suspension combination.\u003c\/p\u003e\u003ch3\u003eWhy Choose the KW V2 for This Application?\u003c\/h3\u003e\u003cp\u003eChoose the V2 when ride height alone is not enough and you want direct control over rebound. Rebound tuning can be used to influence how quickly the chassis settles after compression and how firmly the body is tied down through transitions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16-click low-speed rebound adjustment\u003c\/li\u003e\n\u003cli\u003eContinuously adjustable ride height within the application-specific range\u003c\/li\u003e\n\u003cli\u003eApplication-developed spring and damper package\u003c\/li\u003e\n\u003cli\u003eUseful tuning range for street, canyon and fast-road setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMake:\u003c\/strong\u003e BMW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e X3 (F25) with electronic dampers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 4WD xDrive28i, 28d, 35i\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Jobber Model Years:\u003c\/strong\u003e 11-17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Part Number:\u003c\/strong\u003e 152200AA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Height Adjustment:\u003c\/strong\u003e 30-50 mm (1.2-2.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Height Adjustment:\u003c\/strong\u003e 30-60 mm (1.2-2.4 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Spring Rate:\u003c\/strong\u003e Progressive-rate spring (KW jobber designation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Spring Rate:\u003c\/strong\u003e Progressive-rate spring (KW jobber designation)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEnthusiast Setup Perspective\u003c\/h3\u003e\u003cp\u003eA good installation should leave enough travel for the road or circuit being used. Chasing maximum lowering at the expense of bump travel can work against the very grip and control this system is intended to provide. For a road-driven car, preserving usable bump travel and sensible alignment is usually more important than using the full available lowering range.\u003c\/p\u003e\u003ch3\u003eImportant KW Fitment Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 1:\u003c\/strong\u003e Height adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKW Note 88:\u003c\/strong\u003e Electronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Specifications above are tied to the exact KW part number shown and the application data in the supplied KW jobber sheet. Confirm the vehicle's drivetrain, factory electronic suspension, axle weight and any listed hardware requirements before ordering.\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":49275370275066,"sku":"KWS152200AA","price":2994.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0325\/6352\/7739\/files\/04e46533-fe0d-42e2-bab0-f32ecd1b3bfb-800_e3e07bd0-3cb2-4a16-8888-4a1bc6ca0df3.jpg?v=1782954121","url":"https:\/\/lgcracing.com\/products\/kw-coilover-kit-v2-for-bmw-x3-f25-with-edc","provider":"Legacy Racing","version":"1.0","type":"link"}