Description
This KONIG hub-ring set provides the dimensional interface between a compatible wheel with a 73.1mm center bore and a vehicle hub measuring 54.1mm. The outer diameter seats in the wheel, while the inner diameter fits over the vehicle hub pilot.
Specifications and compatibility
- Manufacturer part number: HR735410
- Outer diameter: 73.1mm
- Inner diameter: 54.1mm
- Quantity: Four rings
Selection and installation
Confirm both diameters and the ring seating profile before ordering. Nominal diameter alone does not establish compatibility with every wheel design.
Hub rings assist with centering during installation. They do not change bolt pattern, offset, or brake clearance and do not replace correct wheel hardware or tightening procedures.
The ring must seat correctly so the wheel mounting face sits flat against the hub.