Description
The Ampliform uses a mesh-inspired spoke layout and flow-formed construction. Intersecting spokes give the design visual depth, with the finish highlighting the detail across the wheel face.
This listing specifies an 18x9.5B wheel, a +35mm offset, a 5x114.3 bolt pattern, and Gloss Bronze finish.
Engineering and design
Flow forming applies pressure to the wheel barrel after casting to develop the finished barrel structure. It is a different manufacturing process from producing a fully forged wheel.
The B suffix identifies the face profile. It is a spoke-geometry designation, not an additional measurement of wheel width.
Specifications
- Manufacturer part number: AM98514358B
- Wheel size: 18x9.5B
- Offset: +35mm
- Bolt pattern: 5x114.3
- Finish: Gloss Bronze
- Construction: Flow formed
- Center bore: 73.1mm
- Published load rating: 1521 lb per wheel
- Published wheel weight: 20.83 lb
Fitment considerations
Confirm the vehicle hub diameter, correct lug hardware and seating type, brake clearance, tire sizing, and suspension and fender clearance before ordering. Bolt pattern alone does not establish fitment. Hub rings may be needed when the wheel bore is larger than the vehicle hub.
Wheel width and offset work together to determine inner and outer clearance. Check the intended tire and suspension setup as part of the complete fitment.