Description
Eibach Pro-Spacer Wheel Spacers – 2021-2026 Ford Mustang Mach-E / 2021-2026 Ford Mustang Mach-E (GE1) brings the compatible Pro-Spacer choices for 2021-2026 Ford Mustang Mach-E / 2021-2026 Ford Mustang Mach-E (GE1) into one listing so wheel position can be adjusted by thickness and finish without treating each Eibach SKU as a separate product page.
This should be treated as a wheel-fitment decision rather than a cosmetic add-on. Tire width, wheel width, camber, ride height, brake package, and fender room all affect the correct thickness.
Application focus: This page is tied to chassis GE 1; drivetrain AWD, RWD; trim/submodel GT, Select, Route 1, Premium; factory-option notes including Excludes vehicles w/ MagneRide Damping System; Extended Range, X. Those details matter because Eibach may assign different components within the same model generation.
What makes this listing specific: This parent groups 6 Eibach SKU configurations for 2021-2026 Ford Mustang Mach-E / 2021-2026 Ford Mustang Mach-E (GE1). The selector changes the exact part supplied while keeping related choices on a single shopping page.
Why This Eibach Setup Makes Sense
- Widen Your Stance - For Better Handling.
- Made from High-Strength Aircraft-Aluminum Alloy.
- Precision Engineered Hub-Centric - for Perfect Fit and Wheel Balance.
- Reduced Weight Compared to Steel Wheel Spacers.
- Kit Includes 2 Spacers and all necessary mounting hardware.
Choosing the Correct Variant
Choose thickness only after measuring both inner suspension clearance and outer fender clearance. Finish is cosmetic; hardware and spacer-system requirements remain tied to the selected Eibach SKU.
- Thickness: 20mm, 25mm, 30mm
- Finish: Silver, Black
Product Details
- Eibach package: 20mm Pair / 20mm Pair (Black) / 25mm Pair / 25mm Pair (Black)
- Product family: PRO-SPACER
- Eibach part numbers: S90-4-20-022, S90-4-20-022-B, S90-4-25-039, S90-4-25-039-B, S90-4-30-029, S90-4-30-029-B
What This Listing Represents
20mm Pair / 20mm Pair (Black) / 25mm Pair / 25mm Pair (Black). The selected Eibach part number determines the exact component or kit supplied.
Fitment Notes
- 20mm Spacer / Bolt Pattern 5x108 / Hub Center 63.3
- Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
- When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
- 25mm Spacer / Bolt Pattern 5x108 / Hub Center 63.3
- When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible.
- Do not use with vehicles equipped with steel wheels!
Installation Planning
Measure twice before selecting thickness, then verify hub engagement, wheel seating, fastener length, and tire-to-body clearance after installation.
Fitment data is application-specific. Confirm the selected Eibach part number against the exact vehicle configuration before ordering.