Description
Eibach Pro-Spacer Wheel Spacers – 2015-2018 Honda H-RV & Additional Applications lets 2015-2018 Honda H-RV & Additional Applications owners change effective wheel offset using Eibach's matched spacer hardware, with the available thicknesses organized as selectable variants.
This should be treated as a wheel-fitment decision rather than a cosmetic add-on. Tire width, wheel width, camber, ride height, brake package, and fender room all affect the correct thickness.
Application focus: This page is tied to chassis RU, RS, RZ; engine/application 2.0 T, 2.0L, 2.0L I4; drivetrain FWD, AWD; trim/submodel Hybrid, EX,LX,SPORT, EX, TOURING, EX-L, SPORT TOURING. Those details matter because Eibach may assign different components within the same model generation.
What makes this listing specific: This parent groups 3 Eibach SKU configurations for 2015-2018 Honda H-RV & Additional Applications. The selector changes the exact part supplied while keeping related choices on a single shopping page.
Why This Eibach Setup Makes Sense
- Widen Your Stance - For Better Handling.
- Made from High-Strength Aircraft-Aluminum Alloy.
- Precision Engineered Hub-Centric - for Perfect Fit and Wheel Balance.
- Reduced Weight Compared to Steel Wheel Spacers.
- Kit Includes 2 Spacers and all necessary mounting hardware.
Choosing the Correct Variant
Choose thickness only after measuring both inner suspension clearance and outer fender clearance. Finish is cosmetic; hardware and spacer-system requirements remain tied to the selected Eibach SKU.
- Thickness: 15mm, 20mm, 25mm
Product Details
- Eibach package: 15mm Pair / 20mm Pair / 25mm Pair
- Product family: PRO-SPACER
- Eibach part numbers: S90-4-15-010, S90-4-20-014, S90-4-25-011
What This Listing Represents
15mm Pair / 20mm Pair / 25mm Pair. The selected Eibach part number determines the exact component or kit supplied.
Fitment Notes
- 15mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64mm
- Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 26.25mm) minus spacer-thickness (i.e. 15mm) = 11.25mm excess stud length. The cut-out should have a depth of 12mm.
- 20mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64
- Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 26.25mm) minus spacer-thickness (i.e. 20mm) = 6.25mm excess stud length. The cut-out should have a depth of 7mm.
- 25mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64
- Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 26.25mm) minus spacer-thickness (i.e. 25mm) = 1.25mm excess stud length. The cut-out should have a depth of 2mm.
Installation & Setup Considerations
Before driving, confirm full wheel seating, correct hardware engagement, brake and caliper clearance, fender clearance through steering and travel, and the specified torque procedure.
Fitment data is application-specific. Confirm the selected Eibach part number against the exact vehicle configuration before ordering.