Eibach Pro-Spacer 5mm Wheel Spacers - 2012+ Fiat 500 - 4x98 | 58mm Hub Bore

The Eibach Pro-Spacer S90-1-05-011 moves the wheel mounting face outward to alter wheel position and track width. Select it around the existing wheel offset, tire size, and available clearance rather than appearance alone. Application family: Fiat 500.

Technical details

• Configuration: 5mm Pair.
• Spacer thickness: 5mm per spacer.
• Bolt pattern: 4x98.
• Center bore: 58mm.
• Material: aluminum alloy.
• Application-specific hub-centric design.
• Manufacturer part number: S90-1-05-011.

A spacer reduces the wheel’s effective positive offset by its thickness. It does not change tire diameter or lower the vehicle’s center of gravity. With equal spacers fitted at both wheels on one axle, the nominal track-width increase is 10mm.

Application and installation notes

• Wheel fasteners are not supplied. Select compatible longer bolts or studs, increasing their working length by the spacer thickness while checking thread engagement and rear clearance.

Check fender coverage, tire clearance at full steering lock and suspension compression, hub engagement, and brake clearance. Use the correct mounting system and hardware; do not assume one kit suits every vehicle sharing its bolt pattern.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment