Eibach Pro-Spacer 30mm Wheel Spacers - 2019-2023 Kia Telluride AWD 3.8L V6

The Eibach Pro-Spacer S90-4-30-032 moves the wheel mounting face outward to alter wheel position and track width. Select it around the existing wheel offset, tire size, and available clearance rather than appearance alone. Application family: Hyundai Palisade, Hyundai Santa Fe, Hyundai Tucson and additional applications in the fitment table.

Technical details

• Configuration: 30mm Pair.
• Spacer thickness: 30mm per spacer.
• Material: aluminum alloy.
• Application-specific hub-centric design.
• Kit includes two spacers and the specified mounting hardware.
• Manufacturer part number: S90-4-30-032.

A spacer reduces the wheel’s effective positive offset by its thickness. It does not change tire diameter or lower the vehicle’s center of gravity. With equal spacers fitted at both wheels on one axle, the nominal track-width increase is 60mm.

Application and installation notes

• Wheel-face pockets must provide at least 14mm clearance with 15mm spacers, 9mm with 20mm spacers, or 4mm with 25mm spacers. If these clearances cannot be achieved, the specified shorter hardware is required; otherwise the spacers cannot be installed. Not suitable for steel wheels.

Check fender coverage, tire clearance at full steering lock and suspension compression, hub engagement, and brake clearance. Use the correct mounting system and hardware; do not assume one kit suits every vehicle sharing its bolt pattern.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment