Eibach Pro-Spacer 10mm Wheel Spacers - 1993-2001 Subaru Impreza - 5x100 | 56mm Hub Bore

The Eibach Pro-Spacer S90-6-10-003 moves the wheel mounting face outward to alter wheel position and track width. Select it around the existing wheel offset, tire size, and available clearance rather than appearance alone. Application family: Scion FR-S, Subaru BRZ, Subaru Impreza and additional applications in the fitment table.

Technical details

• Configuration: 10mm Pair.
• Spacer thickness: 10mm per spacer.
• Bolt pattern: 5x100.
• Center bore: 56mm.
• Material: aluminum alloy.
• Application-specific hub-centric design.
• Manufacturer part number: S90-6-10-003.

A spacer reduces the wheel’s effective positive offset by its thickness. It does not change tire diameter or lower the vehicle’s center of gravity. With equal spacers fitted at both wheels on one axle, the nominal track-width increase is 20mm.

Application and installation notes

• Measure the original stud knurls at both axles before ordering because dimensions vary by model and year. This kit specifies 14.9mm knurls, or 14.3mm for Subaru. Different knurl sizes require the appropriate alternative hardware. The supplied longer studs replace the originals.

Check fender coverage, tire clearance at full steering lock and suspension compression, hub engagement, and brake clearance. Use the correct mounting system and hardware; do not assume one kit suits every vehicle sharing its bolt pattern.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment