Eibach Pro-Spacer 18mm Wheel Spacers - 1978-1995 Porsche 928 - 5x130 | 71.5mm Hub Bore

The Eibach Pro-Spacer S90-6-18-001 moves the wheel mounting face outward to alter wheel position and track width. Select it around the existing wheel offset, tire size, and available clearance rather than appearance alone. Application family: Porsche 911, Porsche 928, Porsche 944 and additional applications in the fitment table.

Technical details

• Configuration: 18mm Pair.
• Spacer thickness: 18mm per spacer.
• Bolt pattern: 5x130.
• Center bore: 71.5mm.
• Material: aluminum alloy.
• Application-specific hub-centric design.
• Manufacturer part number: S90-6-18-001.

A spacer reduces the wheel’s effective positive offset by its thickness. It does not change tire diameter or lower the vehicle’s center of gravity. With equal spacers fitted at both wheels on one axle, the nominal track-width increase is 36mm.

Application and installation notes

• Replace the original wheel studs with the longer studs supplied in the kit.
• Application condition for 1995-1998 Porsche 911 Carrera RWD 993: Excludes Turbo.

Check fender coverage, tire clearance at full steering lock and suspension compression, hub engagement, and brake clearance. Use the correct mounting system and hardware; do not assume one kit suits every vehicle sharing its bolt pattern.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment