Eibach Pro-Spacer 25mm Wheel Spacers - 2013-2018 Subaru BRZ - 5x100 | 56mm Hub Bore

The Eibach Pro-Spacer S90-4-25-017 moves the wheel mounting face outward to alter wheel position and track width. Select it around the existing wheel offset, tire size, and available clearance rather than appearance alone. Application family: Scion FR-S, Subaru BRZ, Subaru Crosstrek and additional applications in the fitment table.

Technical details

• Configuration: 25mm Pair.
• Spacer thickness: 25mm per spacer.
• Bolt pattern: 5x100.
• Center bore: 56mm.
• Material: aluminum alloy.
• Application-specific hub-centric design.
• Kit includes two spacers and the specified mounting hardware.
• Manufacturer part number: S90-4-25-017.

A spacer reduces the wheel’s effective positive offset by its thickness. It does not change tire diameter or lower the vehicle’s center of gravity. With equal spacers fitted at both wheels on one axle, the nominal track-width increase is 50mm.

Application and installation notes

• The wheel mounting face must contain pockets deep enough to clear protruding original studs. Required pocket depth exceeds the stud protrusion remaining after spacer installation: for example, a 35mm stud behind a 25mm spacer needs an 11mm pocket.

Check fender coverage, tire clearance at full steering lock and suspension compression, hub engagement, and brake clearance. Use the correct mounting system and hardware; do not assume one kit suits every vehicle sharing its bolt pattern.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment