Eibach Pro-Lift Kit HD Rear Lift Springs - 2024-2025 Ineos Grenadier - 1000lbs

The Eibach Pro-Lift Kit HD E30-34-001-14-02 raises ride height for the specified applications using replacement springs. Match the spring position and load specification to the vehicle’s actual equipment and installed weight. Application family: INEOS Grenadier, INEOS Grenadier Quartermaster.

Technical details

• Package contents: Pair of 2 Springs.
• Ride-height reference — 2024-2026 INEOS GRENADIER SUV 3.0L 6 Cyl. Turbo 4WD: +2.8"-1.4" Rear.
• Manufacturer part number: E30-34-001-14-02.

Spring-supported lift changes the suspension’s static operating position. Shock length and available compression and droop travel must suit the resulting height. The HD configuration is intended to support the additional constant load specified for the application; it does not increase the vehicle’s legal payload rating.

Application and installation notes

• Rear Springs only Listed rear lift heights range from 0lbs(1st height listed) to 1000lbs(2nd height listed). Only recommended to run at fully load height, other heights listed for reference only. Too much lift will cause poor ride quality. Recommended to pair with Eibach Pro-Truck Reservoir Shocks. Damage could occur to factory drive shaft with change in ride height. Consult instruction manual for proper installation.

After installation, check alignment, tire and fender clearance, and brake-line and ABS-wire routing. Ride-height change depends on the exact application, original equipment, and vehicle weight.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment