Description
The DBA 5000 Series Drilled Front Brake Rotor provides a replacement braking surface for 2016-2019 Audi R8 Iron Rotor.
The 5000 Series uses an iron friction ring and a separate aluminum center hat. Dividing these functions allows the wearing friction component to be serviced separately from a reusable hat, subject to condition and exact component compatibility.
The aluminum hat is part of the series’ approach to managing rotor mass and heat transfer at the hub. Replacement rings and hats must match the particular assembly; vehicle application alone does not establish interchangeability.
This XD-type surface combines drilled holes and dimples. DBA does not recommend 5000 Series XD rotors for track use.
Key Specifications
- Manufacturer part number: DBA52834WSLVXD
- Position: Front
- Product series: 5000 Series
- Construction: Two-piece rotor design
- Friction surface: Drilled & Dimpled
- Center / hat finish: Silver
Application and Installation Notes
Match the axle, brake package and rotor dimensions to the vehicle. Where a left or right position is specified, order the correct side.
Confirm the quantity required before ordering. Follow the applicable installation and bedding instructions.
Vehicle Fitment
Review the supplied applications below together with the brake-package requirements and part number.
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Audi | R8 | Base |
| 2018 | Audi | R8 | Plus |
| 2018 | Audi | R8 | Plus Spyder |
| 2018 | Audi | R8 | RWS |
| 2018 | Audi | R8 | Spyder |
| 2013,2015 | Audi | RS5 | Base |
| 2015 | Audi | RS5 | Cabriolet |