Description
The Clutch Masters FX400 clutch kit, part number 03015-HDCL, is configured for BMW E12/E23/E24/E28. The FX400 friction system is intended for demanding modified street and competition applications.
Technical Specifications
- Manufacturer part number: 03015-HDCL
- Friction system: ceramic.
- Pressure-plate design: Power Plus I heavy-duty assembly.
- Published FX400 series holding-capacity increase: 170%. This is a series claim, not an application-specific torque rating.
- Disc layout: 8 friction pucks.
Driving Characteristics
Ceramic friction material produces rapid engagement. Low-speed chatter can occur during takeoff or reversing; a sprung hub, where specified, cushions torsional inputs but does not make the clutch behave like an organic street disc.
Package Contents
- Pressure plate
- Clutch disc
- Release bearing
- Pilot bearing, where applicable
- Alignment tool
Installation and Setup
Inspect the flywheel surface, release system and applicable pilot bearing during replacement. Follow the application-specific assembly and adjustment instructions. Allow at least 500 miles of normal stop-and-go driving for bedding-in, subject to the instructions supplied with this exact kit. Avoid full-throttle shifts and compression braking during this period.
Vehicle Applications
Match the engine, transmission, production details, and clutch or flywheel requirements above as well as the vehicle application below. Swapped combinations require separate compatibility checks.
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1969-1974 | BMW | 2800 | Base |
| 1979-1981 | BMW | 528i | Base |
| 1983-1984 | BMW | 533i | Base |
| 1985-1988 | BMW | 535i | Base |
| 1988 | BMW | 535is | Base |
| 1977-1978 | BMW | 630CSi | Base |
| 1978-1984 | BMW | 633CSi | Base |
| 1985-1989 | BMW | 635CSi | Base |
| 1978-1984 | BMW | 733i | Base |
