Description
The AST Suspension Lowering Springs for BMW i5 xDRIVE (G60) provide an application-specific lowering solution for owners changing ride height without purchasing a complete coilover system.
The springs establish the spring-supported axle height; rear height-control hardware must be set as specified for this application. Their progressive design changes the effective spring rate through compression, allowing a different response as suspension load increases. Lowering also changes available suspension travel, so damper compatibility and application restrictions matter as much as the advertised drop.
Key specifications
- Approximate front lowering: 20 mm.
- Approximate rear lowering: 0-20 mm.
- Spring lowering and rear height-control hardware follow the application requirements below.
- Manufacturer part number: ASTLS-24-027.
Application details
| Make | Model | Engine / application | Body style | Chassis / type | Application dates |
|---|---|---|---|---|---|
| BMW | i5 xDRIVE | M60 xDRIVE | SEDAN | G60 | 07/2023- |
Application requirements
- Due to the lower ground clearance, caution needs to be taken to protect the battery pack
- The rear consists of adjustable lowering links
- For a correct ride height the lowering links should be adjusted to a length of 68-72mm center to center
- Developed for use with compatible OEM dampers, subject to the application restrictions above.
Installation and setup
Compare the exact engine, body style and original suspension specification with the application details before ordering. Stated lowering is approximate; factory sport suspension, vehicle equipment and existing component condition can affect the measured change. Inspect dampers, mounts and bump stops during installation, check tire clearance, and have the alignment measured after the springs settle.