Description
The AST Suspension Lowering Springs for Volvo V90 (236) provide an application-specific lowering solution for owners changing ride height without purchasing a complete coilover system.
The springs determine the installed ride height rather than an adjustable spring perch. Their progressive design changes the effective spring rate through compression, allowing a different response as suspension load increases. Lowering also changes available suspension travel, so damper compatibility and application restrictions matter as much as the advertised drop.
Key specifications
- Approximate front lowering: 25 mm.
- Approximate rear lowering: 0-25 mm.
- Fixed-height spring system; ride height is not perch-adjustable.
- Manufacturer part number: ASTLS-23-142.
Application details
| Make | Model | Engine / application | Body style | Chassis / type | Application dates |
|---|---|---|---|---|---|
| Volvo | V90 | V90 Cross Country (4WD) 2.0 / 2.0D / 2.0 Mild Hybrid | ESTATE | 236 | 10/2016- |
Application requirements
- Not compatible with vehicles with airsuspension
- we recommend: remove serial distance blocks up to 20mm, over 20mm replace with 5mm spring pads / from 30mm replace with 10 or 15mm spring pads
- Lowering the rear axle by using the included springs pads beneath the sideward seat erea of the composite leaf spring
- Removing the rear sping pads completely is also an option
- Developed for use with compatible OEM dampers, subject to the application restrictions above.
Installation and setup
Compare the exact engine, body style and original suspension specification with the application details before ordering. Stated lowering is approximate; factory sport suspension, vehicle equipment and existing component condition can affect the measured change. Inspect dampers, mounts and bump stops during installation, check tire clearance, and have the alignment measured after the springs settle.