TEIN S.TECH Lowering Springs – 1994–2001 Acura Integra (Incl. TypeR)

Save $70
TeinSKU: TEINSKA18-S3B00

Price:
$280 $350

Description

This S.TECH spring kit is selected for Acura Integra applications detailed below. It changes the spring and ride-height specification while retaining the vehicle’s compatible original-style damper arrangement.

Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.

The S.TECH spring family offers an application-specific lowering option without converting to a height-adjustable coilover system. Spring rate controls how much the suspension deflects under load; the dampers still determine how that movement is controlled.

Product identification

Item Detail
Manufacturer part number SKA18-S3B00
Product family S.TECH
Configuration Lowering spring kit; dampers are not included

Application-specific specifications

Application Front spring rate Rear spring rate Front reference height change Rear reference height change
Acura Integra 1994–2001 (DC2), 1800 cc, FWD 6 kgf/mm 4.9 kgf/mm -64 mm (-2.5 in) -42 mm (-1.7 in)
Acura Integra 1994–2001 (DC4), RS, 1800 cc, FWD 6 kgf/mm 4.9 kgf/mm -64 mm (-2.5 in) -42 mm (-1.7 in)

Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.

Vehicle application

Years / production dates Make Model Chassis Trim / restriction Engine displacement Drivetrain Market
1994–2001 ACURA INTEGRA DC2 See installation notes 1800 cc FWD USA
1994–2001 ACURA INTEGRA DC4 RS 1800 cc FWD USA

Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.

Installation and setup

Inspect the dampers, upper mounts and spring isolators before installation. Lowering reduces available clearance and can change alignment. Follow the application-specific bump-stop instructions and check alignment and tire clearance after fitting.

Application-specific installation notes

  • Acura Integra 1994–2001 (DC2): 3dr/4cyl/incl typer. Front: cut bump rubber at 25 mm from the bottom and use the upper portion. Rear: cut bump rubber at 25 mm from the bottom and use the upper portion.
  • Acura Integra 1994–2001 (DC4): 3dr/4cyl. Front: cut bump rubber at 25 mm from the bottom and use the upper portion. Rear: cut bump rubber at 25 mm from the bottom and use the upper portion.

Estimate shipping

You may also like

Recently viewed