Description
This S.TECH spring kit is selected for Ford Mustang applications detailed below. It changes the spring and ride-height specification while retaining the vehicle’s compatible original-style damper arrangement.
Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.
The S.TECH spring family offers an application-specific lowering option without converting to a height-adjustable coilover system. Spring rate controls how much the suspension deflects under load; the dampers still determine how that movement is controlled.
Product identification
| Item | Detail |
|---|---|
| Manufacturer part number | SKGC0-S3B00 |
| Product family | S.TECH |
| Configuration | Lowering spring kit; dampers are not included |
Application-specific specifications
| Application | Front spring rate | Rear spring rate | Front reference height change | Rear reference height change |
|---|---|---|---|---|
| Ford Mustang 2015–2023 (S550), L4 ECOBOOST, 2300 cc, RWD | 3.1 kgf/mm | 13.4 kgf/mm | -45 mm (-1.8 in) | -40 mm (-1.6 in) |
| Ford Mustang 2015–2023 (S550), V6, 3700 cc, RWD | 3.1 kgf/mm | 13.4 kgf/mm | -45 mm (-1.8 in) | -40 mm (-1.6 in) |
| Ford Mustang 2015–2023 (S550), V8 GT PREMIUM, 5000 cc, RWD | 3.1 kgf/mm | 13.4 kgf/mm | -45 mm (-1.8 in) | -40 mm (-1.6 in) |
Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.
Vehicle application
| Years / production dates | Make | Model | Chassis | Trim / restriction | Engine displacement | Drivetrain | Market |
|---|---|---|---|---|---|---|---|
| 2015–2023 | FORD | MUSTANG | S550 | L4 ECOBOOST | 2300 cc | RWD | USA |
| 2015–2023 | FORD | MUSTANG | S550 | V6 | 3700 cc | RWD | USA |
| 2015–2023 | FORD | MUSTANG | S550 | V8 GT PREMIUM | 5000 cc | RWD | USA |
Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.
Installation and setup
Inspect the dampers, upper mounts and spring isolators before installation. Lowering reduces available clearance and can change alignment. Follow the application-specific bump-stop instructions and check alignment and tire clearance after fitting.
Application-specific installation notes
- Ford Mustang 2015–2023 (S550): Front: cut bump rubber at 50 mm from the top and use the upper portion. Without magneride suspension
