Description
The TEIN FLEX Z suspension package for Subaru Forester applications detailed below is intended for street use and adjustable ride height. Its spring, damper and mounting configuration should be selected as a complete application rather than by vehicle name alone.
Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.
Design and adjustment
Twin-tube dampers use 16-level adjustment to change compression and rebound together. Full-length height adjustment separates the primary ride-height setting from spring preload, making it easier to establish a consistent starting setup.
FLEX Z uses sealed damper bodies. Replacement shock bodies are the service route; this series is not conventionally disassembled for overhaul.
Product identification
| Item | Detail |
|---|---|
| Manufacturer part number | VSSA4-C1SS3 |
| Series | FLEX Z |
Application-specific specifications
| Application | Front spring rate | Rear spring rate | Front reference height change | Rear reference height change |
|---|---|---|---|---|
| Subaru Forester 2009–2013 (SH6), 2.5L, 2500 cc, 4WD/AWD | 7 kgf/mm | 5 kgf/mm | -55 mm (-2.2 in) | -50 mm (-2.0 in) |
Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.
| Application | Front upper mount | Rear upper mount |
|---|---|---|
| Subaru Forester 2009–2013 (SH6), 2.5L, 2500 cc, 4WD/AWD | Reinforced-rubber mount | Reinforced-rubber mount |
| Application | Recommended front height-change range | Recommended rear height-change range |
|---|---|---|
| Subaru Forester 2009–2013 (SH6), 2.5L, 2500 cc, 4WD/AWD | -65 to -45 mm | -60 to -40 mm |
Vehicle application
| Years / production dates | Make | Model | Chassis | Trim / restriction | Engine displacement | Drivetrain | Market |
|---|---|---|---|---|---|---|---|
| 2009–2013 | SUBARU | FORESTER | SH6 | 2.5L | 2500 cc | 4WD/AWD | USA |
Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.
Included configuration
The application record identifies springs as included with this suspension kit. Upper-mount configuration is shown separately above; components marked as original are reused from the vehicle.
Installation and setup
Set the suspension within its application-specific recommended height range, check clearance through steering and suspension travel, and align the vehicle after fitting. Change damping settings progressively where adjustment is available; the firmest setting is not automatically the most suitable.
