Description
The TEIN 4X4 DAMPER SPORT suspension package for Toyota Fj Cruiser / Toyota 4RUNNER / Lexus GX470 applications detailed below is intended for application-specific 4x4 suspension setup. Its spring, damper and mounting configuration should be selected as a complete application rather than by vehicle name alone.
Representative image: Photos illustrate the product series or component type. Actual product appearance, dimensions, mounting configuration, and included hardware may vary by application. Refer to the listed part number, specifications, and included components for the product supplied.
Design and adjustment
The 4X4 DAMPER SPORT family is designed around the demands of road and off-road suspension use. Select the configuration by exact chassis and factory equipment, rather than by vehicle name alone.
The applicable lift, spring arrangement and retained components vary with the vehicle. Check travel, alignment and clearance at the chosen height before use.
Product identification
| Item | Detail |
|---|---|
| Manufacturer part number | VSTF4-F1SS2 |
| Series | 4X4 DAMPER SPORT |
Application-specific specifications
| Application | Front spring rate | Rear spring rate | Front reference height change | Rear reference height change |
|---|---|---|---|---|
| Toyota Fj Cruiser 2007–2009 (GSJ15L), 4000 cc, 4WD/AWD | 10.5 kgf/mm | 4.5 kgf/mm | +40 mm (+1.6 in) | +40 mm (+1.6 in) |
| Toyota 4RUNNER 2003–2009 (N210), 4000 cc, 4WD/AWD | 10.5 kgf/mm | 4.5 kgf/mm | +40 mm (+1.6 in) | +40 mm (+1.6 in) |
| Toyota 4RUNNER 2003–2009 (N210), 4700 cc, 4WD/AWD | 10.5 kgf/mm | 4.5 kgf/mm | +40 mm (+1.6 in) | +40 mm (+1.6 in) |
| Lexus GX470 2003–2009 (UZJ120L), 4700 cc, 4WD/AWD | 10.5 kgf/mm | 4.5 kgf/mm | +40 mm (+1.6 in) | +40 mm (+1.6 in) |
Height figures are changes relative to the original suspension: negative values indicate lowering and positive values indicate a raised height. Inch figures are rounded conversions. Actual installed height depends on vehicle condition, equipment and setup.
| Application | Front upper mount | Rear upper mount |
|---|---|---|
| Toyota Fj Cruiser 2007–2009 (GSJ15L), 4000 cc, 4WD/AWD | Original upper mount reused | Original upper mount reused |
| Toyota 4RUNNER 2003–2009 (N210), 4000 cc, 4WD/AWD | Original upper mount reused | Original upper mount reused |
| Toyota 4RUNNER 2003–2009 (N210), 4700 cc, 4WD/AWD | Original upper mount reused | Original upper mount reused |
| Lexus GX470 2003–2009 (UZJ120L), 4700 cc, 4WD/AWD | Original upper mount reused | Original upper mount reused |
| Application | Recommended front height-change range | Recommended rear height-change range |
|---|---|---|
| Toyota Fj Cruiser 2007–2009 (GSJ15L), 4000 cc, 4WD/AWD | +30 to +50 mm | +999 to +999 mm |
| Toyota 4RUNNER 2003–2009 (N210), 4000 cc, 4WD/AWD | +30 to +50 mm | +999 to +999 mm |
| Toyota 4RUNNER 2003–2009 (N210), 4700 cc, 4WD/AWD | +30 to +50 mm | +999 to +999 mm |
| Lexus GX470 2003–2009 (UZJ120L), 4700 cc, 4WD/AWD | +30 to +50 mm | +999 to +999 mm |
Vehicle application
| Years / production dates | Make | Model | Chassis | Trim / restriction | Engine displacement | Drivetrain | Market |
|---|---|---|---|---|---|---|---|
| 2007–2009 | TOYOTA | FJ CRUISER | GSJ15L | See installation notes | 4000 cc | 4WD/AWD | USA |
| 2003–2009 | TOYOTA | 4RUNNER | N210 | See installation notes | 4000 cc | 4WD/AWD | USA |
| 2003–2009 | TOYOTA | 4RUNNER | N210 | See installation notes | 4700 cc | 4WD/AWD | USA |
| 2003–2009 | LEXUS | GX470 | UZJ120L | See installation notes | 4700 cc | 4WD/AWD | USA |
Match the chassis, market and equipment above. Dates shown for non-US markets can be production dates rather than US model years; an open-ended application is not confirmation for a later redesigned chassis.
Included configuration
The application record identifies springs as included with this suspension kit. Upper-mount configuration is shown separately above; components marked as original are reused from the vehicle.
Installation and setup
Set the suspension within its application-specific recommended height range, check clearance through steering and suspension travel, and align the vehicle after fitting. Change damping settings progressively where adjustment is available; the firmest setting is not automatically the most suitable.
