Eibach Pro-Spacer 20mm Wheel Spacers - 1995-1999 BMW M3 (E36) - 5x120 | 72.5mm Hub Bore

The Eibach Pro-Spacer S90-7-20-010 moves the wheel mounting face outward to alter wheel position and track width. Select it around the existing wheel offset, tire size, and available clearance rather than appearance alone. Application family: BMW 318i, BMW 318is, BMW 325i and additional applications in the fitment table.

Technical details

• Configuration: 20mm Pair.
• Spacer thickness: 20mm per spacer.
• Bolt pattern: 5x120.
• Center bore: 72.5mm.
• Material: aluminum alloy.
• Application-specific hub-centric design.
• Manufacturer part number: S90-7-20-010.

A spacer reduces the wheel’s effective positive offset by its thickness. It does not change tire diameter or lower the vehicle’s center of gravity. With equal spacers fitted at both wheels on one axle, the nominal track-width increase is 40mm.

Application and installation notes

• When using 20mm System 7 spacers, the wheelbolts must not be longer than 13.5mm beyond the wheelhub. If this is the case the bolts must be replaced with shorter bolts. (Please follow installation instructions!).

Check fender coverage, tire clearance at full steering lock and suspension compression, hub engagement, and brake clearance. Use the correct mounting system and hardware; do not assume one kit suits every vehicle sharing its bolt pattern.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment