Eibach Pro-Spacer 20mm Wheel Spacers (Pair) - 2014-2018 BMW 228i - S90-7-20-044

The Eibach Pro-Spacer S90-7-20-044 moves the wheel mounting face outward to alter wheel position and track width. Select it around the existing wheel offset, tire size, and available clearance rather than appearance alone. Application family: BMW 228i, BMW 330i, BMW 330i xDrive and additional applications in the fitment table.

Technical details

• Configuration: 20mm Pair.
• Spacer thickness: 20mm per spacer.
• Bolt pattern: 5x112.
• Center bore: 66.5mm.
• Material: aluminum alloy.
• Application-specific hub-centric design.
• Manufacturer part number: S90-7-20-044.

A spacer reduces the wheel’s effective positive offset by its thickness. It does not change tire diameter or lower the vehicle’s center of gravity. With equal spacers fitted at both wheels on one axle, the nominal track-width increase is 40mm.

Application and installation notes

• Use the additional wheel bolts supplied with this system when mounting the wheels; the original wheel bolts are too long for this installation.

Check fender coverage, tire clearance at full steering lock and suspension compression, hub engagement, and brake clearance. Use the correct mounting system and hardware; do not assume one kit suits every vehicle sharing its bolt pattern.

Check your exact year, model, trim, and suspension configuration against the application information below before ordering.

Vehicle fitment